Holden Combo - Combo - Specifications -

Home
>
Vehicles
>
Combo
>
Specifications

Combo

Shopping Tools

Find a Dealer Build & Price Brochure Request Test Drive Dealer Enquiry Service Request

Combo

Combo

Compare Another Model

Specifications
Engine Specifications	Variable intake control and high exhaustgas recirculation levels.Four cylinders. Alloy cylinder head. Double overhead camshafts operate four valves per cylinder. Sequential multipoint fuel injection.Distributorless direct ignition system. Coil-at-plug ignition. Cylinder selective knock control. Electronic throttle control. Electric cooling fan. 100 amp alternator
Capacity (cc)	1364
Power	66 @ 5600rpm (ECE, kW) Maximum figures as per ECE regulations
Torque	125 @ 4000rpm (ECE, Nm) Maximum figures as per ECE regulations
Transmission	5-speed manual transmission
Fuel economy (L/100km)	6.2 Fuel economy based on ADR 81/02 testing for combined urban/extra urban driving. These figures are provided to assist you in comparing the fuel consumption of this vehicle with other vehicles. Fuel consumption depends on factors such as traffic conditions, vehicle condition, vehicle load and your driving style.
Recommended fuel	E10, ULP
Fuel tank capacity (L)	52.0
Brakes	Front ventilated disc/rear disc. Load sensing brake pressure proportioning valve.
Towing capacity (kg)	1000 with trailer brakes / 550 without trailer brakes
Service	The complimentary inspection is due at 3,000km or 3 months (whichever occurs first). The first service is due at 15,000km or 12 months (whichever occurs first) and then every 15,000km or 12 months (whichever occurs first) since the last service. Additional services may be required under certain driving conditions such as when towing (refer to owner's handbook).
Gross Vehicles Mass (GVM) (kg)	1925.0

More from Holden

Check out how Holden Financial Services can help you

Holden New Zealand Dealers

Street View

X